Diagzone Xdiag Subscription Renew, LAUNCH LTR-01 RF Sensor, Thinkdiag Renew , Scania SDP3 Installation
Recently,Yanhua team released their new product:Yanhua 35160 and 35080 odometer corrector.Here I want to share the procedures of how to use Yanhua 35080 and 35160 programmer to correct odometer BMW 35160 or 35080 EEPROM
For more topics about Vehicle Odometer Corrction,check here:https://www.chinaobd2.com/wholesale/mileage-programmer/
Procedures:
Solder the 35xx chip on the meter to the speciafied location of the simulatior.
Note:Pay attention to the chip direction.
Connect the Yanhua 35160 or 35080 odometer programmer to laptop by Mini USB cable.
Create a new folder on your desktop,for example,named
How useful was this post?
Click on a star to rate it!
Average rating / 5. Vote count:
Please keep this link if you copy the post!
Tags: 4D cat EEPROM EPROM laptop lish odometer programmer original program wholesale
Related Posts

SmartPRO 5000U-PLUS 5000u Plus Universal USB Programmer PCF29XX Chips Support Li...
2023.06.7

Advice for Land Rover key programming : digimaster3 + Yanhua mini ACDP
2019.04.9

Opel New Cruise Control Programming by OPCOM VAXU-COM
2019.05.13

Volvo Premium Tech Tool PTT Accessory Kit Programming Guide
2019.05.14

Xhorse VW MQB Add Key/All Keys Lost Assistant Tools Review
2023.03.15

BMW E90 NBT EVO Retrofit Guide
2019.02.24

How to Replace and Program New BCM for Opel Corsa-D
2019.03.21

Benz DTS Monaco Software Free Download
2019.07.14

Detroit GHG14 Engine Idle Does not Go into Continuous Run Mode
2024.01.24

Newest OPCOM VAUX-COM V1.99 V1.95 All Version Free Download
2023.04.7