This instruction show you guide on how to do steering angle test and calibration for Bendix EC-60 advanced braking system and Bendix EC-80 ESP/ESP+ braking systems.
Related Contents:
JPRO Noregon Commercial Fleet Diagnostics 2023 2021 Free Download
Noregon JPRO DLA+ 2.0 Adapter
This test allows for verification of steering angle sensor functionality and provides recalibration ability if necessary.
1 Select the Battery Voltage Test and press Enter or the Start button.
2 The test dialog will be displayed.
3 The Steering Angle Test tab guides the user through the diagnostic steps for ensuring proper steering angle alignment.
Select the Graph tab to view a graph of the monitored steering angle.
Select Calibration to run the recalibration procedure which relearns the current steering angle position as 0 degrees.
4 To begin the Steering Angle Test, select the Next button. Step 1 of the procedure provides instructions to verify straight ahead position of the steer axle wheels compared to the steering wheel. The green area on the steering angle number line shows the acceptable target range.
5 Select the Next button to continue.
6 Step 2 requires turning the steering wheel
How useful was this post?
Click on a star to rate it!
Average rating / 5. Vote count:
Please keep this link if you copy the post!