Bendi B30, B40 and B45 Series IV lift trucks,tilt cylinder rod end may loosen in some applications.If neglected, tilt cylinder rod end may loosen until separate from cylinder.This instruction show you guide on how to repair Bendi B30, B40 and B45 Series IV lift trucks tilt cylinder rod end may loosen trouble.More case for Landoll Bendi,please refer to Landoll Bendi Trouble Repair
Related Contents:
Landoll Bendi Forklift Service Repair Manual Download
DESCRIPTION
The rod end is connected to the cylinder through a threaded connection. The connection provides adjustment of the tilt cylinder to ensure uniform tilting of the mast.
A lock nut, lock nut retaining tab and a set screw are used to keep the threaded connection tight.
COMPLIANCE
1.At the next available service event (preventative or unplanned downtime) the connection on each tilt cylinder needs to examined and tightened.
2.Tools needed: Hammer and chisel, (to bend locking tab), 1/8
How useful was this post?
Click on a star to rate it!
Average rating / 5. Vote count:
Please keep this link if you copy the post!