Skip to content
Menu
OBD2 Scanner Blog
  • Home
  • Car Diagnostic Tool
    • MB Star Diagnosis
    • BMW Diagnostic Tool
    • GM Tech2
    • Volvo Vocom Interface
  • OBD2 Code Scanner
    • VXDIAG
  • Tech Support
OBD2 Scanner Blog

Autel MX808 / MK808 New Added Active Test and Special Function Review

Posted on December 25, 2024 by VCDS

Diagzone Xdiag Subscription Renew, LAUNCH LTR-01 RF Sensor, Thinkdiag Renew , Scania SDP3 Installation

Autel adds new function “Active test” and “Special function” on MX808 and MK808 series tablets. You can obtain new software package by tapping “Update” icon on your tablets.

More details please see below:

1.What is the new function?

Active test function and Special function highlighted in red in below picture.

Autel MX808 / MK808 New Added Active Test and Special Function Review

2.What model will be added the new function? and what version can support it?

New Function Model System Version Estimated Released Date
Active test, special function MX808, MX808TS, MK808, MK808BT, MK808TS, TS608, IM508 V2.62 and above 1st, Jun. 2022

Please see below table for model that will be added new function and relevant version information:

3. How to get the new function?

Tap Update icon to update the device’s system version to V2.62 download all available vehicle software.

Note: If there is not enough storage for downloading update, customer can insert a micro SD card to the device.

4. What is Active Test function and Special Function?

Active Test function is used for outputting signal to vehicle control unit using the device to control actuator for test, so that it can test whether the actuator works

normally, such as Fuel Pumps test, EGR test, etc.

Special Function generally refers to the initial adaptation, self-learning or some auto detection function with many procedures that the vehicle is performed after maintenance or reset is done or some related component in electronic control system is replaced, such as Crankshaft Position Sensor Learn.

5. How to perform Active test Function?  

a) Read vehicle by auto detect, manual input or manual selection;

b) Select Auto scan or Control Unit —– (Powertrain/Body/Chassis) —- relevant module—Active test;

c) Take steps by following the on-screen instructions.

6. How to perform Special Function?

a) Read vehicle by Auto detect or manual input or manual selection;

b) Select Auto scan or Control Unit —– (Powertrain/Body/Chassis) —- (relevant module) —Special function;

c) Take steps by following the on-screen instructions.

7. What vehicle can the device support Active test and Special Function.

All vehicle brands that the device can support.

8. Which area of device will be added the new function?

Device that is purchased from all area except China Mainland.

How useful was this post?

Click on a star to rate it!

Average rating / 5. Vote count:

This Post: Autel MX808 / MK808 New Added Active Test and Special Function Review From ChinaOBD2 Official Blog
Please keep this link if you copy the post!

Post navigation

Prev: Prev: Autel Maxisys Elite II New Function Intelligent Diagnostic Introduction
Next: Next: Toyota TIS Techstream V 17.10.012 Free Download

Leave a Reply Cancel reply

Your email address will not be published. Required fields are marked *

Recent Posts

  • ECUDESK Software Latest ECU Support List (2025.05)
  • Yanhua Module 38 Update BMW BDC2 Reflash and Replace Functions
  • Vapon Update BDC2 IMMO Module Data Erase
  • How to Replace U17 and L8 Components for OBDSTAR G3 Startup Failure?
  • Alientech Kess3 Adds Master TCU OBD-Bench-Boot Protocol

Recommend OBD2 Scanner

ME9.7 ECU Engine Computer ME9.7 ECU Engine Computer TabScan T6PT3G Diagnosis VCI for Porsche Diagnostic Tool Porsche Diagnostic Tool

Recent Comments

  • amr on MAN EOL Flash File Editor + MAN Immo Calculator Free Download
  • Pasquale Greenwald on Jungheinrich ETM/V 10-12 Tightening Torque for Screwed Connection on Brake Systems
  • VCDS on Scania SDP3 2.53.1 Diagnosis & Programming Free Download
  • Crossley on What are the functions of Iprog+ Programmer?
  • Lukas on VAG EDC15 EDC16 IMMO OFF Software Free Download

Archives

Categories

  • BMW Diagnostic Tool
  • Car Diagnostic Tool
  • Key Cutting Machine
  • Key Programming Tool
  • MB Star Diagnosis
  • OBD2 Code Scanner
  • Tech Support
  • VXDIAG

Tags

adapter Auto Pick and Decoder Car Key Copy Car Key Programmer cat Code Reader diagnostic software ECU Chip Tunning ecu programmer Ford gm handy baby Handy Baby 2 Key Programmer Handy Baby II Key Programmer HEX V2 immo iprog key Key Pro key programmer laptop Launch lish LISHI new arrivals nexiq nexiq link diesel truck interface nexiq truck diagnostic NEXIQ USB Link OBD2 obdii original program Scania VCI smart VAG COM Cable VCDS VCDS Cable VCDS VAG COM Cable vci VW wholesale X-PROG Box X-PROG Box ECU Programmer XPROG-M

Hot Selling

  • ME 9.7 ECU Engine Computer
  • MINI VCI J2534
  • NCF29XX Programmer
  • ThinkTool Pros+

Links

  • China OBD2
  • EPS Foam Machine
  • Foxdiag
  • Сканер OBD2
©2025 OBD2 Scanner Blog | Powered by chinaobd2