Skip to content
Menu
OBD2 Scanner Blog
  • Home
  • Car Diagnostic Tool
    • MB Star Diagnosis
    • BMW Diagnostic Tool
    • GM Tech2
    • Volvo Vocom Interface
  • OBD2 Code Scanner
    • VXDIAG
  • Tech Support
OBD2 Scanner Blog

Autel MaxiIM IM608 Pro Review: Ultimate All-in-One Key Programming Tool

Posted on December 24, 2024 by VCDS

Autel MaxiIM IM608 Pro is the most advanced and smart key programming tool . Compare to Autel im608, Autel im608 pro has great improvement in hardware and software. IM608 pro adds unlock key 11 key types(for Audi/BMW), supports read/write EEPROM/ engine ECU/MCU, read/write key chip/Mercedes Infrared Key etc. Besides, it has the same diagnostic level as Autel MK908/MK906BT/MS906BT. 

Autel MaxiIM IM608 Pro Review: Ultimate All-in-One Key Programming Tool

Autel IM608 Pro come with XP400 Pro which is an advanced All-in-One key programmer. Pros of XP400 Pro:1.NO misconnection burnout 2. More stable of read/write key 3.Extended IMMO functions on BMW/BENZ and Audi etc. It supports Data Read/Write of 3,000 Plus Types. XP400 Pro will read PIN, key learning remote learning, key generation, IMMO ECU reset/adaptation/refresh/coding, IMMO data backup. This bundle is the most cost-effective choice for workshops and Locksmith. 

Autel IM608 Pro diagnostic tool can perform advanced ECU Coding same as Autel Elite/ Elite 2/ MS908S PRO/ MS908/ MK908/ MK908P/ MK906BT/ MS906BT. ECU Coding function enable you to disable the automatic Start-Stop, customize the daytime running lights, and set the speed to show in the digital display below the speedometer, tuning the ignition time ,tuning the oil injection, flash hidden function, and so on. You need to input the data manually.

Autel IM608 Pro bidirectional control scanner can perform Active Tests to request information or command an actuator to perform specific tests, such as turning the fuel pump on and off, cycling the a/c clutch on and off, performing an evaporative emissions leak test, fast troubleshooting your vehicle defective parts and components, not simply by reading codes. P

Autel IM608 Pro auto key fob can perform 30+ service functions such as Oil Reset, ABS Bleed, SRS, SAS, D-P-F, EPB, Battery Registration, Brake Reset, Injector Coding, Key Fob Coding, fully meeting your needs. IM608 Pro automotive diagnostic scanner with OE-Level all systems diagnosis same as Autel MS906TS/DS808(K)/MS906/MP808(K)/MP808BT/MP808TS. It can access all available vehicle modules for more than 80 US, Asian and European makes and models.

The Autel IM608 Pro diagnostic scanner has been upgraded to be able to fully access protected FCA vehicles! Autel IM608 Pro is compatible with 2017 & later FCA cars (Chrysler, Dodge, Jeep, Alfa Romeo, Fiat, etc.) to perform full systems diagnostics codes, bi-directional control, and active tests, ECU Coding, even more. 

Autel MaxiIM IM608 Pro Review: Ultimate All-in-One Key Programming Tool

You will never walk/work alone. We would be honored if we could have you come on board. Alone with a 2-year free update, 1-year warranty, and lifetime technical support, IM608 pro will be the great key programming scan tool you’ve ever had. NOTE: From August 1, 2022, purchased and registered IM608 Pro comes with two years of free updates.

Autel MaxiIM IM608 Pro Review: Ultimate All-in-One Key Programming Tool

Shop Now: 

Autel IM608 Pro: https://www.chinaobd2.com/vp-autel-maxiim-im608-pro.html
Autel IM608 Pro with APB112,Gbox2: https://www.chinaobd2.com/vp-autel-maxiim-im608pro-plus-apb112-and-gbox2.html
Autel IM608 Pro Full Version (wtih IMKPA,AP112,Gbox2): https://www.chinaobd2.com/vp-autel-maxiim-im608pro-plus-imkpa-gbox2-and-apb112.html

How useful was this post?

Click on a star to rate it!

Average rating / 5. Vote count:

This Post: Autel MaxiIM IM608 Pro Review: Ultimate All-in-One Key Programming Tool From ChinaOBD2 Official Blog
Please keep this link if you copy the post!

Post navigation

Prev: Prev: CG FC200 ECU Repair Expert V1.0.9.0 Update
Next: Next: CGDI Solved Mercedes Vito Viano W636/W639 Not Show Mileage Problem

Leave a Reply Cancel reply

Your email address will not be published. Required fields are marked *

Recent Posts

  • Caterpillar C9 Engine Coolant Level Signal Invalid Fault Code 12 111-2
  • chinaobd2.com Spring Festival Sale: Global Save Up to 50%
  • Allison 3000 & 4000 Gen5 Fault Code P070C Transmission Fluid Level Sensor Circuit Low
  • Allison 3000 & 4000 Gen5 Fault Code P070C Transmission Fluid Level Sensor Circuit Low
  • Doosan Machine Fault Code P060B ADC Test Error Solution

Recommend OBD2 Scanner

ME9.7 ECU Engine Computer ME9.7 ECU Engine Computer TabScan T6PT3G Diagnosis VCI for Porsche Diagnostic Tool Porsche Diagnostic Tool

Recent Comments

  • amr on MAN EOL Flash File Editor + MAN Immo Calculator Free Download
  • Pasquale Greenwald on Jungheinrich ETM/V 10-12 Tightening Torque for Screwed Connection on Brake Systems
  • VCDS on Scania SDP3 2.53.1 Diagnosis & Programming Free Download
  • Crossley on What are the functions of Iprog+ Programmer?
  • Lukas on VAG EDC15 EDC16 IMMO OFF Software Free Download

Archives

Categories

  • BMW Diagnostic Tool
  • Car Diagnostic Tool
  • Key Cutting Machine
  • Key Programming Tool
  • MB Star Diagnosis
  • OBD2 Code Scanner
  • Tech Support
  • VXDIAG

Tags

adapter Auto Pick and Decoder Car Key Copy Car Key Programmer cat Code Reader diagnostic software ECU Chip Tunning ecu programmer Ford gm handy baby Handy Baby 2 Key Programmer Handy Baby II Key Programmer HEX V2 immo iprog key Key Pro key programmer laptop Launch lish LISHI new arrivals nexiq nexiq link diesel truck interface nexiq truck diagnostic NEXIQ USB Link OBD2 obdii original program Scania VCI smart VAG COM Cable VCDS VCDS Cable VCDS VAG COM Cable vci VW wholesale X-PROG Box X-PROG Box ECU Programmer XPROG-M

Hot Selling

  • ME 9.7 ECU Engine Computer
  • MINI VCI J2534
  • NCF29XX Programmer
  • ThinkTool Pros+

Links

  • China OBD2
  • EPS Foam Machine
  • pcb assembly
©2025 OBD2 Scanner Blog | Powered by Superb Themes