Confirmed! Autel IM508 programmer is confirm to program new keys to Mercedes Benz when all keys are lost but you should have the xp400 adapter and G box 2.
https://www.chinaobd2.com/wholesale/xp400-key-and-chip-programmer-5913.html
The Autel xp400 adapter is for Benz and it looks like a Benz key and it connects to the scanner. You can also buy nust the x400 scanner if you really want to do cas4 bmw too. The software from the im508 & im608 are identical. No difference at all.
source: https://www.chinaobd2.com/wholesale/autel-g-box2-tool-for-mercedes-benz-all-keys-lost-5943.html
The G-BOX2 realizes the fast mode on vehicle and bench when Mercedes-Benz with DAS3 EIS/EZS loses all keys. The use of the G-BOX2 reduces the time needed and eliminates the process of insertion and removal.
The G-BOX2 can read and access most engines manufactured by Bosch including EDS/ MEx17 series engines used in BMW and Volkswagen Vehicles. This capability supports the ability to perform adaptions when all keys are lost and engine is replaced.
The G-BOX2 is compatible with the Autel
How useful was this post?
Click on a star to rate it!
Average rating / 5. Vote count:
Please keep this link if you copy the post!