Diagzone Xdiag Subscription Renew, LAUNCH LTR-01 RF Sensor, Thinkdiag Renew , Scania SDP3 Installation
A Audi A8L made 2014 with 70 thousands kilometers,equiped with 2.5 CVBA engine.The owner discribed that EPC light on,shake intermittently when accelerating,accelerate slowly, and hard to start.
Trouble Diagnose:
Technician found two trouble code by VAS6150.
P1054:Secondary Air Injection Pipe Malfunction
P2070:Intake Manifold Tuning Value Stuck Open Bank
Firstly,check the trouble code P2070:Intake Manifold Tuning Value Stuck Open Bank
- Check the intake air control valve,it is normal.
- Vacuum solenoid valve work correctly.
- Auto water pump was damaged.
Technician found variable intake flaps work correctly after replacing a new water pump,and P2070 trouble cleanning.
Next,technician checked the trouble code P1054,below show the circuit diagram.
Technician detected the voltage between cam control valve connector 1 and GND,it is 0 V(error),but the voltage between N319 connector and GND is 12.Check the diagram,it shows that N208 and N319 are supplied by the same one power.It mean there is a open circuit.
How to Solve?
P2070:Replacing a new water pump.
P1054:Fix the wire
How useful was this post?
Click on a star to rate it!
Average rating / 5. Vote count:
Please keep this link if you copy the post!