Skip to content
Menu
OBD2 Scanner Blog
  • Home
  • Car Diagnostic Tool
    • MB Star Diagnosis
    • BMW Diagnostic Tool
    • GM Tech2
    • Volvo Vocom Interface
  • OBD2 Code Scanner
    • VXDIAG
  • Tech Support
OBD2 Scanner Blog

Audi A6 Engine Vibration When Starting Car

Posted on February 24, 2019 by VCDS

Diagzone Xdiag Subscription Renew, LAUNCH LTR-01 RF Sensor, Thinkdiag Renew , Scania SDP3 Installation

Here is a mini real repair experience on Audi A6 engine vibration when starting car.Hope this article will bring some enlightenment to your work.

Audi A6 Engine Vibration When Starting Car

Vehicle information:

Audi A6 1.8T made 2011 with 70+ thousands miles.

 

Trouble Symptoms:

1. Every morning,starting the car with cold engine vibration about 10s~15s,then running normally.

2. Engine run normally at idle.

 

Engine Vibration When Starting Trouble Diagnosis:

Technicians perform checking as below:

1. Use diagnostic tool read the trouble code,but there is not any trouble exist.

2. Clean the throttle body,injectors and intake pipeline,the trouble is still exist.

3. The idle and high speed exhaust are normally by exhaust gas analyzer.

4. Replace ignition coil,spark plug,water temperature sensor,even ECU still can not solve the trouble.

 

Technicians get into the trouble,what result in this problem?

Why I replace so many parts,but still can not find out the trouble reason?

 

Our technicians analyse the trouble symptoms,and believe that:

It is not always idle control error result in engine vibration,it most likely resulted by dripping or oil leakage on the spark plug after a long time leave unused.After engine starting,the oil on the surface of spark plug will volatilize within 10s-15s,then engine work normally.

 

In order to verify this guess,clean the spark plug and install them back,start the engine at normal temperature,then turn off the engine.Next day morning,remove the spark plugs to check,technicians found the spark plug of number 1 cylinder and number 4 cylinder were wet.And the oil on the surface of spark plug is engine oil instead of gasoline.The cylinder cover engine oil flow through oil seal and valve pipe to the spark plug.Clean the spark plug and install them back,starting the engine without the vibration.

 

Engine Vibration Solution:

Disassemble the cylinder cover,replace the valve oil seal and re-grinding valve.Start the engine to test trouble and found the trouble symptoms disappeared.

How useful was this post?

Click on a star to rate it!

Average rating / 5. Vote count:

This Post: Audi A6 Engine Vibration When Starting Car From ChinaOBD2 Official Blog
Please keep this link if you copy the post!

Post navigation

Prev: Prev: DiagBox Software Free Download All Version Here
Next: Next: How to Update ETKA 7.5 Plus to ETKA 8

Leave a Reply Cancel reply

Your email address will not be published. Required fields are marked *

Recent Posts

  • Yanhua ACDP2 Program BMW G Chassis BDC2 All Keys Lost on Bench
  • Scania Truck ALM 000800 Interrupted LIN Communicatin Siren
  • BMW G Series BDC2 Module Virgin and Replacement by APPRO2
  • CG FC200 V1.2.9.2 Update: BMW Coolant Temperature Setting Added
  • Scania Truck ALM 000463 Motion and Inclination Detector,Calibration Fault

Recommend OBD2 Scanner

ME9.7 ECU Engine Computer ME9.7 ECU Engine ComputerTabScan T6PT3G Diagnosis VCI for Porsche Diagnostic Tool Porsche Diagnostic Tool

Recent Comments

  • amr on MAN EOL Flash File Editor + MAN Immo Calculator Free Download
  • Pasquale Greenwald on Jungheinrich ETM/V 10-12 Tightening Torque for Screwed Connection on Brake Systems
  • VCDS on Scania SDP3 2.53.1 Diagnosis & Programming Free Download
  • Crossley on What are the functions of Iprog+ Programmer?
  • Lukas on VAG EDC15 EDC16 IMMO OFF Software Free Download

Archives

Categories

  • BMW Diagnostic Tool
  • Car Diagnostic Tool
  • Key Cutting Machine
  • Key Programming Tool
  • MB Star Diagnosis
  • OBD2 Code Scanner
  • Tech Support
  • VXDIAG

Tags

adapter Auto Pick and Decoder Car Key Copy Car Key Programmer cat Code Reader diagnostic software ECU Chip Tunning ecu programmer Ford gm handy baby Handy Baby 2 Key Programmer Handy Baby II Key Programmer HEX V2 immo iprog key Key Pro key programmer laptop Launch lish LISHI new arrivals nexiq nexiq link diesel truck interface nexiq truck diagnostic NEXIQ USB Link OBD2 obdii original program Scania VCI smart VAG COM Cable VCDS VCDS Cable VCDS VAG COM Cable vci VW wholesale X-PROG Box X-PROG Box ECU Programmer XPROG-M

Hot Selling

  • ME 9.7 ECU Engine Computer
  • MINI VCI J2534
  • NCF29XX Programmer
  • ThinkTool Pros+

Links

  • China OBD2
  • EPS Foam Machine
  • Foxdiag
  • Сканер OBD2
©2025 OBD2 Scanner Blog | Powered by chinaobd2