Alientech KESS V3 SUZUKI Bosch MED17.9.63 VR, WR via OBD

Diagzone Xdiag Subscription Renew, LAUNCH LTR-01 RF Sensor, Thinkdiag Renew , Scania SDP3 Installation

Alientech KESS V3 Reprogram SUZUKI Bosch MED17.9.63 via OBD (World Exclusive!)

Update time: January 17, 2024
Update info:

Work on Suzuki Baleno, Swift, SX-4, and Vitara, thanks to the new Virtual Reading protocol for KESS3. Expand your workshop’s business opportunities with a quick and precise service dedicated to the small turbo-petrol engines from the Japanese manufacturer. With KESS3, you won’t just perform tuning but also meet various other demands from your clientele, such as fuel efficiency and repairs.

Focus on the new ECU:

Bosch MED17.9.63

Work without risks using KESS3’s OBD mode, ensuring a new performance configuration for vehicles entering your workshop in just a few simple steps.

Alientech Kess3 SUZUKI Bosch MED17.9.63 VR, WR in OBD

Baleno	1.0 12v Boosterjet 5MT	Petrol	82 kW
Baleno	1.0 12v Boosterjet Automatik 6AT	Petrol	82 kW
Swift	1.0 12v Boosterjet 5MT	Petrol	82 kW
Swift	1.0 12v Boosterjet Automatik 6AT	Petrol	82 kW
Swift	1.0 12v Boosterjet SHVS 5MT	Petrol	82 kW
Swift Sport	1.4 16v Boosterjet 6AT	Petrol	103 kW
Swift Sport	1.4 16v Boosterjet 6MT	Petrol	103 kW
SX4 S-Cross	1.0 12v Boosterjet 5MT	Petrol	82 kW
SX4 S-Cross	1.0 12v Boosterjet Automatik 6AT	Petrol	82 kW
SX4 S-Cross	1.4 16v Boosterjet 6AT	Petrol	103 kW
SX4 S-Cross	1.4 16v Boosterjet 6MT	Petrol	103 kW
Vitara	1.0 12v Boosterjet 5MT	Petrol	82 kW
Vitara	1.0 12v Boosterjet Automatik 6AT	Petrol	82 kW
Vitara	1.4 16v Boosterjet 6AT	Petrol	103 kW
Vitara	1.4 16v Boosterjet 6MT	Petrol	103 kW

How to perform SUZUKI Bosch MED17.9.63 read, write, VR with Kess V3?

Connect Kess V3 ECU Programmer and computer via USB cable, run Alientech Suite software

Check the connection mode supported:

SX4 S-Cross(2016) 4 16v Boosterjet 6AT supports OBD and Bench modes, but doesn’t support Boot mode;
SX4 S-Cross(2016) 4 16v Boosterjet 6MT supports OBD and Boot mode, but doesn’t support Bench mode.
Except that, other SUZUKI Bosch 9.63 ECUs in the ECU list support OBD, Bench, and Boot modes.

Select the corresponding Suzuki ECU model and the connection mode, and then check the manual incl. operation instruction and connection diagram, follow it to connect Kess V3 and ECU correctly

After connection, go to the read and write interface, and select the corresponding option to operate.

Original Alientech KESS3 ECU and TCU Programmer:

https://www.chinaobd2.com/vp-alientech-kess-v3.html

This Post: Alientech KESS V3 SUZUKI Bosch MED17.9.63 VR, WR via OBD From ChinaOBD2 Official Blog
Please keep this link if you copy the post!