2010 VW DQ250 TC1766 of CG FC200 ECU Programmer Full Backup on bench

Diagzone Xdiag Subscription Renew, LAUNCH LTR-01 RF Sensor, Thinkdiag Renew , Scania SDP3 Installation

2010 VW DQ250 TC1766 of CG FC200 ECU Programmer Full Backup on bench

To back up the DFlash, Ext DFlash, and PFlash data in a 2010 VW DQ250 MQB TC1766 gearbox using the CG FC200 ECU Programmer, follow these steps:

1. Connect the FC200 programmer and the gearbox using a professional jumper (wire harness) based on the wiring diagram in the FC200 software.
2. Connect the FC200 and computer via a USB cable.
3. Power on the FC200.

1. Select the gearbox model and run the FC200 software.
2. Select Volkswagen (VW) and search for dq250 in the search box.
3. Select the corresponding ECU (VAG_TEMIC_DQ250-MQB TC1766) from the ECU list.
4. Enter the platform interface and click
   

   How useful was this post?

   Click on a star to rate it!

   Submit Rating

   Average rating / 5. Vote count:

   This Post: 2010 VW DQ250 TC1766 of CG FC200 ECU Programmer Full Backup on bench From ChinaOBD2 Official Blog
   Please keep this link if you copy the post!