Lonsdor engineer solved the problem that K518 Pro has some problems for Audi car key adding.
Let’s see how it works well on an Audi A6L 2010.
A small tip at the beginning:
Connect Pin1 and Pin16 of the OBD cable, and connect OBD cable to the vehicle
Select Immo & Remote>> AUDI>> A6L>> 2009>> Immobilizer
First, read engine data
Switch the ignition on
Read data successfully, and save the data with a filename
Confirm the file name
Then, make dealer key
Put a key into the coil of Lonsdor K518 Pro
Read the current key ID and generate key
Generate and lock the dealer key successfully
Finally, learn car key
Follow the K518 Pro key programmer instruction to insert the key and switch ignition on in turn
Learn key successfully.
How useful was this post?
Click on a star to rate it!
Average rating / 5. Vote count:
Please keep this link if you copy the post!