Category: Tech Support

Hitachi ZX890-7 Excavator Main Controller Removal Guide

Posted on by VCDS

This instruction show you guide on how to remove main controller for HITACHI ZX890-7 excavator.   Related Contents: Hitachi MPDr v2.56 v2.25 Diagnostic Software Free Download Hitachi Excavator ZX-7 Service Repair Workshop Manual 2021 Hitachi Dr.ZX Excavator Diagnostic Tool Cable   Procedures: 1.Set the machine position for inspection and maintenance. 2 IMPORTANT Set the key…

+
Posted on by

One user has problem to read and write edc16cp31 with fetrotech ecu programmer, have three tries with three different cars and all three don

+

CGMB Possible add key for W204 AKL?

Posted on by

Question: Is it possible to use CGDI MB to add a key ON CAR (without removing EIS) to W204 when there is no key available? Somebody even tried that? Answer: Of course ! But need to spend an hour to collect data in car if you don

+

GLK 250 cdiX204 AKL Solution with CGMB

Posted on by VCDS

Glk 250 cdiX204 (2012). All key lost! I programmed KeylessGo but work as a ordinary key. I used 41 rom, key CGDI Keyless. Does anyone know what the problem is? Answer: What keyless key you are using? The old type keyless key may not work. Have you tried lock/unlock door by key ? If also…

+