VCI1 Diagnostic Tool For Scania Trucks and Buses of 3 and 4 Series

VCI1 Diagnostic Tool For Scania Trucks and Buses of 3 and 4 Series

Language: English Only

Desctiption:

VCI1 supports diagnostic systems of Scania trucks and buses of 3 and 4 series. VCI1 works with Scania SD2 and Scania SP2 software. (SD – Scania Diagnos software, SP – Scania Programmer software. )
 
VCI1 supports all systems on all vehicles made by Scania from 1995 till 2004 if you need a tool to work with newer models check our shop for Scania VCI2 tool. This tool requires PC with RS232 (COM) port, or USB->RS232 adapter.

Supported Systems:

APS – Air processing system;
BWS – Body work system;
BCS – Bus chassis system;
EBS – Brake management system;
EEC – Exhaust emission control system;
EMS – Engine management system;
COO – Coordinator;
ICL – Instrument cluster;
TCO – Tachograph system

ATA, WTA, CTS and AUS – Auxiliary heater system, Clock timer system, Radio;
OPC and RET – Gearbox management system;
SMS – Suspension management system;
RTI – Road traffic information;
TPM – Tyre Pressure Monitoring;
LDW – Lane Departure Warning;

VCI1 Diagnostic Tool For Scania Trucks and Buses of 3 and 4 Series