US$157.00-2019 Latest Version X-PROG Box ECU Programmer Shipping from Mozambique
Promotion! X-PROG Box ECU Programmer now only need US$157.00, this special price for Mozambique Customers only, and valid untill 2019/2/28
How to enjoy the special price on www.chinaobd2.com?
If you are from Mozambique and the special price is valid before 2019/2/28, you can contact chinaobd2.com online support team.
ChinaOBD2 is a leading supplier of X-PROG Box ECU Programmer, if you are interested in X-PROG Box ECU Programmer, welcome to contact us. We will give you the best price.
Click Here Go to Buy:X-PROG Box ECU Programmer
Chinaobd2.com also has XPROG-M V5.74 X-PROG Box ECU Programmer with USB Dongle for your choice.
Latest Version X-PROG Box ECU Programmer XPROG-M V5.84 with USB Dongle
XPROG-M V5.84 Highlights:
- Latest software version: V5.84?Firmware:V4.4
- With USB Dongle, No need to activate
- Add new authorization: AUTH-0028-1 Renesas V850 Authorized and AUTH-0028-2 Renesas SuperH Authorized 2017/10/9
- Language: English
XPROG-M V5.84 using tips:
- You are not allowed to use this newest dongle to update the older version Xprog to V5.84
- Close all of the computer anti-virus software. If not, X-prog software may be killed.
- Disconnect the internet. If not, the internet maybe damage the hardware.
- Uninstall all of the old version xprog-m or xprog box software before you install V5.84 software we provide, because our xprog-box hardware is not compatible with other lower or higher version software, otherwise the hardware will be damaged and will lose its warranty…
- Never try to UPDATE, the hardware will be damaged if you want to try to update it online, then you will lose its warranty.
XPROG-M V5.84 Authorizations:
- AUTH-0001 Motorola HC05 family authorization (allows to read/write EEPROM)
- AUTH-0002 Motorola HC08 family authorization (allows to read/write EEPROM)
- AUTH-0003 Motorola HC11 family authorization (allows to read/write EEPROM)
- AUTH-0004 Motorola HC12, 9S12 family authorization (allows to read/write EEPROM and flash memory)
- AUTH-0005 Texas Instruments TMS370/TMS374 family authorization (allows to read/write EEPROM)
- AUTH-0006 Motorola HC05Bxx and HC05Xxx family bypass security authorization (allows to read/write secured EEPROM and flash memory)
- AUTH-0007 ST M35080 authorization. Read/Write/Erase device to delivery state.
- AUTH-0008 BMW EWS3 authorization
- AUTH-0009 ATMEGA family authorization (allows to read/write EEPROM and flash memory)
- AUTH-0010 MB ZGS001 authorization
- AUTH-0011 Motorola HC11EA9/E9 bypass security authorization (allows to bypass security bit and read EEPROM and RAM memory)
- AUTH-0012 National CR16 authorization (allows to read/write EEPROM memory)
- AUTH-0014 ST7, ST10 family authorization (allows to read/write internal flash)
- AUTH-0015 MPC5xx authorization (depending on device program automatically detects MPC5xx, M95xxx device type, flash, external flash and configuration memory size)
- AUTH-0018 Motorola HC12, HC912, MC9S12, MC9S12X bypass security authorization (allows to read/write secured EEPROM and flash memory)
- AUTH-0020 ARM (Micronas, …) Family authorization (allows to read/write internal flash and external serial EEPROM)
- AUTH-0021 ARM (Micronas, …) Family bypass security authorization (allows to read/write secured and non-secured internal flash and external serial EEPROM, view/change mileage, Chassis number (VIN), serial number and PIN code).
- AUTH-0023-1 MAC7xxx
- AUTH-0023-2 XC23xx
- AUTH-0024-1 MC9S12Cxx
- AUTH-0024-2 MC9S12XE
- AUTH-0024-3 9S12XE SECURITY
- AUTH-0024-4 MC9S12HA/HY/P
- AUTH-0025-1 MPC/SPC5xxx Authorized 2016/3/13
- AUTH-0027-1 HC(S)908 update Authorized 2016/3/13
- AUTH-0027-2 HC(S)908 sercurity Authorized 2016/3/13
- AUTH-0028-1 Renesas V850 Authorized 2017/10/9
- AUTH-0028-2 Renesas SuperH Authorized 2017/10/9
XPROG-M V5.84 Adapters:
- ADP-0001 TMS370 PLCC28 programming adapter
- ADP-0002 TMS370 PLCC44 programming adapter
- ADP-0003 TMS370 PLCC68 programming adapter
- ADP-0004 Motorola HC05B/X PLCC52 programming adapter
- ADP-0005 Motorola HC05B/X QFP64 programming adapter
- ADP-0006 ST M35080 in-circuit programming adapter
- ADP-0008 TMS374 family in-circuit programming adapter
- ADP-0009 MC68HC05V12 programming adapter
- ADP-0010 TMS374 on-board programming adapter
- ADP-0011 HC11EA9/E9 programming adapter
- ADP-0017 HC(S)12 BDM / ARM Micronas in-circuit programming/bypass security adapter
- Additional adaptor for 5M48H P-Flash
- ADP-0019 Rev.A
- EWS3 adaptor
- EEPROM adaptor
- QFP28 adaptor
- QFP64 adaptor
- QFP80 adaptor
- QFP112 adaptor
- QFP144 adaptor
Install Notice:
XPROG-M V5.84 windows system required as below:
- Windows system should be windows XP 32bit OR windows 7 64 bit, all the patch software for the windows system should be installed already and the windows properly works well…
- The windows system should be with at lest 2 partitions (except the CD ROM.)
- Can not be working with virtual harddisk.
XPROG-M V5.84 Install manuals in words:
- Click the file "installation.reg", get the file information to the regedit.
- Install the file "AdbeRdr11000_zh_CN.exe", it is a must, otherwise the Xprog software will not start.
- Plug the Xprog main interface to the computer, install the USB driver.
- Copy the folder "XPROG-BOX5.84" to the desktop, and open it, and run the "xprogdesktop.exe", then software open.
XPROG-M V5.84 Software Display:
Package Includes:
- 1pc x XPROG-Box Hardware (Aluminum Enclosure) .
- 20pcx Adapters Set
- 1pc x USB Cable.
- 1pc x USB Dongle
- 1pc x CD with XPROG-Box Software (V5.84)
Related Products of xprog
- Lexia-3 for Peugeot Citroen KeyPad Immobilizers Unlock Software
- Metal Model XPROG-M Programmer V5.0
- Xprog-M V5.55 ECU Programmer Newest Xprog M
- XPROG-M V5.50 Box ECU Programmer X-PROG M Support MCU
- ATMEGA64 Repair Chip Update XPROG-M Programmer From V5.0 to V5.45
- ATMEGA64 Repair Chip Update XPROG-M Programmer from V5.0/V5.3/V5.45/V5.50 to V5.55 Full Authorization (Including CAS4) with Stable Software
- V7.14 TM100 Transponder Key Programmer Full Version With 62 Modules Support All Key Lost Update Online Free Lifetime
- V6.08 TM100 Transponder Key Programmer with Basic Module Update Online
- Atmega 64 Repair Chip Update XPROG-M Programmer from V5.0/V5.3/V5.45 to V5.48 with Full Authorization
- ATMEGA64 Repair Chip Update XPROG-M Programmer from V5.0/V5.3 /V5.45 to 5.50 Full Authorization (Including CAS4)
- XPROG-M V5.55 XPROG M Programmer with USB Dongle Especially for BMW CAS4 Decryption Easy to Install
- Latest Version X-PROG V5.60 ECU Programmer XPROG-M with USB Dongle
- Latest Version XPROG-M V5.74 X-PROG Box ECU Programmer with USB Dongle
- 2019 Latest Version X-PROG Box ECU Programmer XPROG-M V5.84 with USB Dongle
How useful was this post?
Click on a star to rate it!
Average rating / 5. Vote count:
Please keep this link if you copy the post!