Toyo-ta G and Toyo-ta H Chip Vehicle OBD Remote Key Programming Device

1.For 4D67,68,72(G), supports both G and H chip, tested on 2015 Camry
2.Programs both Toyo-ta G and Toyo-ta H chip vehicle via OBD2 port.
3.Free shipping to all over the world.

 

Get in the car and close the door, insert the key and turn on the key, insert the device into OBD. After the sound(Dee-), it will start to add the remote control.
After the sound ( Dee- Dee-),open the door, when hear the sound blaring. Press ‘ lock & unlock’ key at the same time. And press the’ lock’ key. If the blaring ends, It’s OK.

Note: Switch is on the right.(add remote control)

Get in the car and close the door, insert the main key into the lock and turn the key on,and then insert the device into the OBD. If it will sound twice, it will start to add transponder.
After the sound (Dee-Dee-), 2-3 minutes later, anti-theft light is on. And then remove the key( anti-theft light will flash), insert the new key and doesn’t need turn the key,anti-theft light will be off later.

Note: switch is on the left.( add transponder)

Customer Feedback:

Product worked as advertised. Programmed 2 Toyo-ta Corolla (2014) keys for $100 total. ($for tool, $35 each for 2 keys,$5 to get keys cut at locksmith).

 

This is a 2 step process-Transponder programmer to have the key work with the car’s security system and Remote programmer to have the lock/Unlock/Trunk/Emergency for key buttons to work with car. This unit handles both programming tasks.

 

Toyo-ta wanted $350 per key, local locksmith wanted $250 for 2 keys. This device save me much.