Diagzone Xdiag Subscription Renew, LAUNCH LTR-01 RF Sensor, Thinkdiag Renew , Scania SDP3 Installation
SmartPRO 5000U-PLUS Universal USB Programmer
Top 3 Reasons To Get SmartPRO 5000U-PLUS Programmer
1. Patented I / O port drive technology, eliminate IC programming burning
Due to universal programmers are requires compatible chips, the requirements for the programming I / O port has been raised to a high level.Brand-new I / O port drive technology enables each I / O port of the universal programmer to pass high-speed signals, suppress overshoot brought by the high-speed signal, protect over-current, provide adequate and sustained output current, bear bus collision and has the ability of quickly recovering from conflict status.
2. ICP online programming, makes it easier to use and more flexible
Separate ICP download line interface is able to program chips on the circuit board online. While the offline programming mode ICP, without connecting to a computer, users only need to get the data stored in the built-in DOM. With few ICP scattered lines, it is potable for the spot debugging or a program upgrade.
3. Massive IC support, provides timely timing upgrade
The SmartPRO 5000U-PLUS programmer is now compatible with various types of MCU / Flash / CPLD / FPGA chips, etc relies on good relationships with the major manufacturers. It also provides a variety of new chips programming ability accurately and timely which will satisfy our customers’ needs to greatest extent.
SmartPRO 5000U-PLUS Specification:
| Type | SmartPRO 5000U-Plus |
| Support device | EPROM, Paged EPROM, parallel and serial EEPROM, FPGA Serial configuration PROM, NOR FLASH and NAND FLASH reservoir, BPROM, NVRAM,CPLD, MCU, Firmware HUB, ARM. standard logic devices(TTLCMOS) etc, device operating voltage:1.8~9V |
| Encapsulation | DIP, SDIP, PLCC, JLCC, SOIC, QFP, TQFP, PQFP, VQFP, TSOP, SOP, TSOPII, PSOP, TSSOP, SON, EBGA, FBGA, VFBGA, μBGA, CSP, SCSP etc |
| Online communication interface | USB 2.0(High Speed) |
| Configuration Options | adaptor, CF card |
| Power Input | AC 100V-240V/47-63Hz |
| Power Output | 12V/2A |
| Dimension-Main Unit | 280mm×170mm×57mm (L×W×H) |
| Built-in DOM | 32Mb×1(default) |
| CF card | 1(optional) |
| Operating system | Windows NT/2000/XP/Win7/VISTA |
SmartPRO 5000U-PLUS software is lifetime free update.
Package including:
1pc x New SmartPRO 5000U Programmer
1pc x USB Cable
1pc x CD Software
1pc x Power Adapter
Original Wellon SmartPRO 5000U-PLUS Universal USB Programmer
How useful was this post?
Click on a star to rate it!
Average rating / 5. Vote count:
Please keep this link if you copy the post!
Tags: SmartPRO Universal Programmer Universal USB Programmer X8-PLUS
Related Posts
Original Wellon VP-698 Universal Programmer
2018.12.17
Original Xeltek USB Superpro 610P Universal Programmer with 48 Universal Pin-dri...
2018.12.17
TOP3100 Universal Programmer Work On Windows7/Vista/Xp 32bits
2018.12.17
SmartPRO 5000U-PLUS Programmer Support Unlock Car keys with NXP PCF79XX NCF29XX ...
2024.01.3
SmartPRO 5000U-PLUS Programmer NXP Chips Support List
2023.06.9
Car keyless entry and start system solution based on NXP products
2023.06.4
SmartPRO 5000U-PLUS 5000u Plus Universal USB Programmer PCF29XX Chips Support Li...
2023.06.7
SmartPRO 5000U-Plus Programmer Software Free Download
2023.06.8
What’s the Features Of SmartPRO 5000U-Plus Programmer
2023.06.10
Five reasons why programmer chip programming is unstable
2023.06.4