Diagzone Xdiag Subscription Renew, LAUNCH LTR-01 RF Sensor, Thinkdiag Renew , Scania SDP3 Installation
EWS Immo Emulator for BMW
Function:
This device can emulate BMW EWS 2 and EWS 3.2 immobilizer (EWS module) in cases when original system restore is impossible
(faulty EWS, lost or damaged transponders, continuous problems with rolling codes etc.)
How to use BMW EWS Immo Emulator?
1. Remove original EWS2 control unit, find +12v ACC, GND, K-line
2. Disconnect emulator from K-line; connect K output from emulator to
3. DME (DDE) <-> EWS line.
4. Don’t forget to short two starter relay wires (EWS connector)!
5. Car is ready to start.
How useful was this post?
Click on a star to rate it!
Average rating / 5. Vote count:
Please keep this link if you copy the post!
Tags: bmw key programmer
Related Posts
Latest Yanhua BMW FEM/BDC Key Programmer
2018.12.17
Newest BMW AK90+ II Key Programmer for All BMW EWS Version V3.19
2018.12.17
CAS Plug For BMW Multi Tool (Add Making Key For BMW EWS)
2018.12.17
R270+ V1.20 BDM Programmer For BMW CAS4 From 2001-2009
2018.12.17
Yanhua Mini ACDP BMW 35080, 35160DO WT EEPROM Read & Write Module
2018.12.17
EWS Editor Version 3.2.0 For BMW
2018.12.17
AK90 Key Programmer AK90+ For All BMW EWS From 1995-2005
2018.12.17
Yanhua Mini ACDP Read BMW DME ISN Code when All Keys Lost No need Soldering
2018.12.17
BMW EWS2 EWS3.2 Emulator E34 E36 E38 E39 E46
2018.12.17
Super BDM Programmer BVA/KEY Programmer For BMW CAS 4 and VW 5th Generation
2018.12.17