Diagzone Xdiag Subscription Renew, LAUNCH LTR-01 RF Sensor, Thinkdiag Renew , Scania SDP3 Installation
Duoyi DY23 Automotive Brake Fluid Tester Digital Brake Fluid Inspection
Operation Manual:
1. Install one 9V(6F22) battery at the back of tester.
2. After inserting the battery, press POWER button to turn on the tester, all LEDs lights turn on with buzzer sounding, which indicates the product self-test is successful.
3. Press SELECT button, it will locate DOT3 model automatically.
4. Each time you push the SELECT button, it will recycle from DOT3 to DOT4 to DOT5.1 with the indicator LEDs.
5. Immerse the probe into brake fluid and you will get different colors of LED lights, they indicate:
Green Light: indicates the brake fluid water content is below 1%
The First Yellow Light: indicates the brake fluid water content is approximately 1.5%
The Second Yellow Light: indicates the brake fluid water content is approximately 2.5%
The First Red Light: indicates the brake fluid water content is approximately 3%
The Second Red Light: indicates the brake fluid water content is more than 4%
6. Press POWER button to turn off the tester.
Note:
1. After use, please clean up the residual stains on the probe that might affect the test.
2. If in use for a long time, you’d better remove all batteries and store in a dry place at a normal room temperature.
Item Height:5 inch
Voltage:12Model
Name:DY23
Item Width:5 inch
Hardware Version:Latest
Software Version:Latest
Electronic:Yes
External Testing Certification:CE
Item Length:25 inch
Item Type: Electrical Testers & Test Leads
Material Type: PlasticItem Weight:0.5 kg
Package Includes:
1pc x Duoyi DY23 Automotive Brake Fluid Tester Digital Brake Fluid Inspection
Duoyi DY23 Automotive Brake Fluid Tester Digital Brake Fluid Inspection
How useful was this post?
Click on a star to rate it!
Average rating / 5. Vote count:
Please keep this link if you copy the post!
Tags: automotive brake fluid tester Brake Fluid Inspection digital brake fluid inspection