Skip to content
Menu
OBD2 Scanner Blog
  • Home
  • Car Diagnostic Tool
    • MB Star Diagnosis
    • BMW Diagnostic Tool
    • GM Tech2
    • Volvo Vocom Interface
  • OBD2 Code Scanner
    • VXDIAG
  • Tech Support
OBD2 Scanner Blog

CI-PROG 300 Remote and Car Chip Adapter (English version)

Posted on December 17, 2018 by VCDS

Diagzone Xdiag Subscription Renew, LAUNCH LTR-01 RF Sensor, Thinkdiag Renew , Scania SDP3 Installation

CI-PROG 300 Remote and Car Chip Adapter (English version)

CI-PROG 300 Remote and Car Chip Adapter

Description:

This device can suitable for following cars:

Toyota Lexus Series:
Toyota currently supported matching smart card to 2011.
Base on Toyota red OBD increase keys and smart card. Delete, match the remote control.
Also support matching the latest Toyota G chip transponder key.

VOLKSWAGEN Series:
It supports to read the password from the old Passat (3BD920802) Touareg Cayenne Audi A6 and Part of the Gauer and so on. Meanwhile, it supports Audi A6 and old Passat mileage adjustment.

Honda Series:
Now it supports matching smart cards and key to 2011.
(Note: currently it does not support matching 3-pin Honda key, later will be amended)

Hyundai Series:
Currently it supports Hyundai smart cards match to 2011.
For example, IX35 requires a password etc.
Support matching the latest 6-digit password Yuet I30, Yu Xiang and so on.
Also support matching Santa Fe 1.8T 8-bit password key, support matching Hyundai remote control.

Nissan series:
Now support matching smart cards and key to 2011.

Suzuki Swift series
Without password matching key for Suzuki tian yu. Also supports Benni and CM8 Joice Mazda Series.
Support matching FAW Mazda M3 M5 M6 key and smart card.
Also supports matching Hainan Mazda key. For example, Holford Star, ect.

General (GM) Series:
Support matching the latest Cruz new LaCrosse new Regal Hideo smart key. (Above models the Software need to buy separately)
Support matching Excelle Lova Aveo Epica key.
Lova and Aveo no need password for key matching but Epica need password.
Support matching the old Regal LaCrosse and other remote control

Kia Series:
Currently supported smart card matches to 2011.
For example: Matching Furui di smart card.
Support matching the latest key and the remote control.

Chery Series:
The only equipment directly OBD read Chery password.
The conditions of directly read 4-digit password via Chery OBD:
(1) Changed the security password
(2) Replacement of anti-theft cases do not enter a new frame number
Above two cases read the password is wrong password

Notes:

Directly insert a new key when matching the key.
If you insert the key that already registered then sometimes prompts the communication failure.
Support matching remote control.
When read out the password, the equipment will show three groups security password.
Generally speaking, the first group is the correct security password for this car.

China auto Series:
In addition to the original equipment, the only other matching machine which supports to match Chinese auto smart card, the Hardware and software need to buy separately. No need password.

When matching the key, the system 1 and system 2 does not require password .But System 3 require it. The password is 3950.
Please insert the new key when matching, if you insert the key already registered then sometimes prompts the communication failure.

 

CI-PROG 300 Remote and Car Chip Adapter (English version)

How useful was this post?

Click on a star to rate it!

Average rating / 5. Vote count:

This Post: CI-PROG 300 Remote and Car Chip Adapter (English version) From ChinaOBD2 Official Blog
Please keep this link if you copy the post!

Tags: auto key programmerKEY TOOLobd keytransponder programming

Post navigation

Prev: Prev: Creator C100 V3.9 Auto Scan OBDII/EOBD Code Reader
Next: Next: Dell D630 Core2 Duo 1,8GHz, WIFI, DVDRW Second Hand Laptop

Leave a Reply Cancel reply

Your email address will not be published. Required fields are marked *

Recent Posts

  • How to Replace U17 and L8 Components for OBDSTAR G3 Startup Failure?
  • Alientech Kess3 Adds Master TCU OBD-Bench-Boot Protocol
  • Scania Truck ALM Alarm System ALM404 Fault in the CAN Communication Solution
  • Use Xhorse MLB Tool MQB48 Adapter and Key Tool Plus in 2 Methods
  • Yanhua ACDP Module 38 Add BMW G Chassis BDC2 Key on Bench

Recommend OBD2 Scanner

ME9.7 ECU Engine Computer ME9.7 ECU Engine Computer TabScan T6PT3G Diagnosis VCI for Porsche Diagnostic Tool Porsche Diagnostic Tool

Recent Comments

  • amr on MAN EOL Flash File Editor + MAN Immo Calculator Free Download
  • Pasquale Greenwald on Jungheinrich ETM/V 10-12 Tightening Torque for Screwed Connection on Brake Systems
  • VCDS on Scania SDP3 2.53.1 Diagnosis & Programming Free Download
  • Crossley on What are the functions of Iprog+ Programmer?
  • Lukas on VAG EDC15 EDC16 IMMO OFF Software Free Download

Archives

Categories

  • BMW Diagnostic Tool
  • Car Diagnostic Tool
  • Key Cutting Machine
  • Key Programming Tool
  • MB Star Diagnosis
  • OBD2 Code Scanner
  • Tech Support
  • VXDIAG

Tags

adapter Auto Pick and Decoder Car Key Copy Car Key Programmer cat Code Reader diagnostic software ECU Chip Tunning ecu programmer Ford gm handy baby Handy Baby 2 Key Programmer Handy Baby II Key Programmer HEX V2 immo iprog key Key Pro key programmer laptop Launch lish LISHI new arrivals nexiq nexiq link diesel truck interface nexiq truck diagnostic NEXIQ USB Link OBD2 obdii original program Scania VCI smart VAG COM Cable VCDS VCDS Cable VCDS VAG COM Cable vci VW wholesale X-PROG Box X-PROG Box ECU Programmer XPROG-M

Hot Selling

  • ME 9.7 ECU Engine Computer
  • MINI VCI J2534
  • NCF29XX Programmer
  • ThinkTool Pros+

Links

  • China OBD2
  • EPS Foam Machine
  • Foxdiag
  • Сканер OBD2
©2025 OBD2 Scanner Blog | Powered by chinaobd2