To Check Fluid Quality:
- Press the button for power on, green LED will light up.
- Insert the tester into reservoir for a second , then the results will be indicated correctly by LEDs.
- Auto power off .
Indications:
- Green: Battery OK, i.e.: No Water Contained in the Brake Fluid
- Yellow: Less than 1% of Water Content in Brake Fluid
- Yellow/Yellow: Approximately 2% of Water Content in Brake Fluid
- Yellow/Yellow/Red: Approximately 3% of Water Content in Brake Fluid;
- The Brake Fluid Should be Changed
- Yellow/Yellow/Red/Red: at least 4% of Water Content in Brake Fluid;
- The Brake Fluid Must be Changed Urgently, Extreme Danger .
How useful was this post?
Click on a star to rate it!
Average rating / 5. Vote count:
Please keep this link if you copy the post!