Can works alone or works with BMW FEM key programmers, i.e Yanhua BMW-FEM,BMW Explorer, VVDI2 BMW, CGDI Prog and BMW F-series FEM Blade key etc
Power supply: 12V dedicated
Pic. 1: the adapters are insert into the testing platform.
Pic. 2: Connect well the harness and the ignition switch is in the OFF status, ensure the voltage is 12V.
Pic.3: Put the FEM key into the sensing area, press the “Enter” button and the red LED flashes.
Press the “Enter” button, the screen displays FEM BDC TESTS:11.2V, the battery icon on the screen turns up, means it starts OK.
Again press the “ENTER” button and ACC OK
Again press the “ENTER” OFF OK
Then FEM BDC test OK, if no connect to FEM BDC, if not ok, it displays: NO FIND FEM BDC HOST.
Package List:
1pc x BMW FEM data desktop test platform BMW FEM BDC Test Platform for FEM/BDC Key, KM reset and ECU Gearbox Programming
How useful was this post?
Click on a star to rate it!
Average rating / 5. Vote count:
Please keep this link if you copy the post!