BMW ENET (Ethernet to OBD) Interface Cable E-SYS ICOM Coding F-Series

Diagzone Xdiag Subscription Renew, LAUNCH LTR-01 RF Sensor, Thinkdiag Renew , Scania SDP3 Installation

BMW ENET (Ethernet to OBD) Interface Cable E-SYS ICOM Coding F-Series

Password for BMW_E-SYS_ENET:

V50.2 Extracting passwords: SQnd$CXL PIN: 2670

V50.3 Extracting passwords: E*G@rqVa PIN: 2670

Product Introduction

BMW series single module programming or modules hiding ENET data line

BMW hidden ENET data cable , F series programming cable , the latest ESYS 3.22.5 and V49.4 data.

BMW F series , the new 1 Series, 3 Series, 5 Series, 7 Series , GT, X3, brush hidden upscale programming line goes on sale !

Buy our ENET lines are presented E-SYS 3.225 software installation packages and ETOKEN and PIN.

This product uses the international top super-six production lines , shielding interference, signal transmission intensity , really pure copper wire,
green insulation , not comparable to other lines .

Product Features

One can hide modules or program single module

1. Lock unlock sound confirmation ( to prevent radio interference, add sound to confirm car locked when turn light confirmation inconvenient. This is setup in cic)

2. Can operate the navigation menu including watching dvd when driving( for driving safety. Let the side driver operate the navigation menu )

3. Display engine output and torque meter ( purely fun, look engine output )

4. Cancel confirmation screen big screen boot delay

5. Open the voice recognition function

6. Three kind of bluetooth phone ringtones ( personality only )

7. Increasing the cic memory address to 50

8. The glass automatically rise to the top process is not terminated by the car door ( easy to get off to close the window waiting )

9. The digital speed display ( fun only )

10. Air-conditioned memory of the last off state ( without air conditioning season is more convenient )

11. Indoor cycling memories of the last time the state when engine off

12. A-pillar electric tailgate buttons and remote control a key to close the power tailgate. At any time terminate the reverse operation ( turn off 15 minutes or more reset )

13. Increasing shift paddles

14. The small screen to the large-screen display modify

15. Pdc display vertical and horizontal

16. Disable the seat belt status display – passenger seat

17. Disable the seat belt status display – driver seat

18. Disable seat belt reminder mistake ! The link is invalid. Device – passenger seat

19. Disable seat belt reminder – driving position

20. Disabled unfasten their seat belts voice prompts – passenger seat

21. Disabled unfasten their seat belts voice prompts – driving position

22. Intersection vehicle high beam automatic control ( no condition tested. Do not know if it is valid )

23. Angel eyes open and cancel functions

24 turn off the engine start-stop function turned on by default

25, gps time synchronization

26. Foot open the back cover

27. Ds show s1-s7 selection

28. Active sports gearbox program sport +

29. Single microphone settings

30. Engine off automatically unlock

31. Internet applications

32. Armrest usb playback video

33. The maximum distance disable front camera view

34. The maximum distance to disable the rear camera view

35. Maximum speed disable front camera view

36. The maximum speed to disable the rear camera view

Package List:

1pc x BMW ENET (Ethernet to OBD) Interface Cable

BMW ENET (Ethernet to OBD) Interface Cable E-SYS ICOM Coding F-Series

How useful was this post?

Click on a star to rate it!

Average rating / 5. Vote count:

This Post: BMW ENET (Ethernet to OBD) Interface Cable E-SYS ICOM Coding F-Series From ChinaOBD2 Official Blog
Please keep this link if you copy the post!

Tags: bmw icom

Leave a Reply Cancel reply