Best Quality Opcom OP-Com Firmware V1.7 2010 /2014V Can OBD2 for OPEL with Single Layer PCB

Posted on by VCDS

Diagzone Xdiag Subscription Renew, LAUNCH LTR-01 RF Sensor, Thinkdiag Renew , Scania SDP3 Installation

Best Quality Opcom OP-Com Firmware V1.7 2010 /2014V Can OBD2 for OPEL with Single Layer PCB

Opcom OP-Com Firmware V1.7 2010 /2014V Can OBD2 for OPEL with Single Layer PCB

New OPCOM V1.7 Firmware 2010V Software Feature:

 
  1. OPCOM is a special PC-based diagnostic interface especially for OPEL.
  2. Software Version:2010/2014 Firmware Version: 1.7
  3. DO NOT update opcom online; otherwise, the device would be damaged!
Opcom OP-Com Firmware V1.7 2010 /2014V Can OBD2 for OPEL with Single Layer PCB
 
New OPCOM V1.70 Firmware 2010/2014V Software Function:
 
  1. It covers almost all Opel cars, incl. new cars with CAN-BUS based diagnostic, such as Vectra-C, Astra-H, Zafira-B.
  2. The program allows users to read out and clear fault codes, shows you live data and perform output test.
  3. The program supports many control units, like Engine, Automatic Transmission, ABS, Airbag, Engine Cooling module,
  4. Instrument Cluster, Electronic Climate Control, Body Control Unit, etc.
  5. Since Opel cars adopt many PINs in the OBD connector, the diagnostic interface works as a multiplexer, and users need select the appropriate pin for communication. PIN3, PIN7, PIN8, PIN12 = Serial Link (ISO9141, KW81, KW82, KWP2000)
  6. Fault codes will be shown with all information available:
 
Full fault code text description:
 
  1. Full status information (Present, Not present, Intermittent)
  2. Users can print out, save, or copy the fault codes to any other application.
    From the fault codes window, users can go directly to the measuring blocks window.
  3. The program shows measuring block information on many control module, users can choose anything from the list on your own.
  4. The program is capable of showing 8 measuring block parameter simultaneously.
The sample rate is depends mostly on the communication protocol.
For example, the older system like Omega-B X 25 DT Engine (ISO-9141-2) can be very slow during communication, while the newer Multec or Bosch units are faster (using KWP-2000), and the newest CAN based control units are very fast!
 
Users can also run output tests on many controllers.
 
  • PIN6-PIN14
  • PIN3-PIN11
  • PIN1
  • HSCAN – Dual-wire, High Speed CAN-BUS, 500 kbps
  • MSCAN – Dual-wire, Medium Speed CAN-BUS, 95 kbps
  • SWCAN – Single-wire, Low Speed CAN-BUS, 33.3 kbps
 
Package includes:
 
  • 1pc x OP COM Interface
  • 1pc x USB Cable
  • 1pc x Software and Drivers CD
 
 
 

Best Quality Opcom OP-Com Firmware V1.7 2010 /2014V Can OBD2 for OPEL with Single Layer PCB

How useful was this post?

Click on a star to rate it!

Average rating / 5. Vote count:

This Post: Best Quality Opcom OP-Com Firmware V1.7 2010 /2014V Can OBD2 for OPEL with Single Layer PCB From ChinaOBD2 Official Blog
Please keep this link if you copy the post!

Tags:

Related Posts

Leave a Reply

Your email address will not be published. Required fields are marked *