ALL-300 Smoke Automotive Leak Locator

ALL-300 Smoke Automotive Leak Locator 

Get ALL-300 Smoke Automotive Leak Locator For Four Reasons:

 

 

1). Help locate the leak position on all vehicle systems in 1 minute

2). Fast determine the leak size by read the flow meter

 

 

1). Easy to Operate 

2). Fast in helping locate the leak 

3). Multi-functional

4). Dual Mode: Smoke Mode, Air Mode 

5). Visual pressure minitoring

6). Visual flow control 

7). Inbuild air compressor 

8). 5L/Min Super flow rate 

9). Visual monitoring of smoke fuel level

10). Bigger oil tank up to 200ml capacity

11). Best mate for automotive scanner

 

 

 1).Unbeatable price / performance ratio

 2).Designed for long time use 

 

 

With inbuild air compressor, and power supplied by 12Volt vehicle battery, its the best tool for leak locating regardless of the working condition.

 

 

1. Significantly reduce the service time-cost

2. Ensure better service quality and discover potential service request

3. AL-300 is a handy new generation of automotive system leak locator

4. AL-300uses Mineral Oil to generate smoke. the oil is possible to get at drug store, or supermarket(Mineral Oil based baby Oil) ,a 30 ML refill will be enough for test

     for 40  times( varies, depend on how long the user operate the equipment for each test.) 

5. AL-300 is a one-time invest for a workshop or garage, but will help so much in work

 

 

 

 

1). The Smoke Automotive Leak Locator is easily controlled with a nice keypress film and a flow control. with visual indication of the pressure level and

         flow  status.

2). Stablized output pressure is perfect to perform leak test of all pipe system with no damage to the vehicle sealing.

3). Save time and fast leak detection. In most cases, a scan tool may find out pressure sensors abnormal etc., while actully the ‘pressure low’ problem is caused by  leak somewhere. 

4). Use Air Mode to fast determine if there’s a leak. and use Smoke Mode to find out where the leak is.

5). Use Air Mode to fast determine if there’s a leak. and use Smoke Mode to find out where the leak is.

6). Adjustable air flow to perform leak test on different system that requires different flow amount. 

7). If the system doesn’t leak, when reached the required pressure, the flow meter readings will drop to 0, otherwise, can determine the leaksize by the flow rate

 

 

The Smoke Automotive Leak Locator is a multi purpose tool essential for EVAP system, but also applicable for: EGR valves, Gaskets & Fittings, Hoses, Worn Throttle shafts, Break Boosters, Catalytic Converters, Oil Leaks, Lamp Housings, manifolds and more…. 

 

 

Fast to know the fuel level, don’t have to guess if its time for fuel refill.

 

ALL-300 Smoke Automotive Leak Locator Target customer:

 

Car manufacturer workshops, Independent Workshop or tire service shop, garages etc. where Professional, reliable and affordable equipment is needed.

 

 

1. Air flow control: 0.1~5 L/MIN

2.  Power supply : DC12V, 8A, 100W 

3. Full set of accessories

 

 

1. Ambient Temperature – 20°C ~ + 50°C

2. Relative Humidity ≤ 90%

 

 

1set × ALL-300 Smoke Automotive Leak Locator