In this instruction,you can learn how to upgrade UltraProg programmer firmware.Please aware, if new firmware version is available in “Upgrade firmware” window. Upgrade is necessary to complete before start the using of new software, otherwise may functions will not work, hardware get freeze, or not working well.
Related Contents:
UltraProg Programmer Software Free Download
How to Install UltraProg Programmer Software
Firmware upgrade is easy operation,to complete please follow the below steps.
1.Be sure device is connected to the correct COM port. You can confirm it under device manager of Windows under COM&LPT point, if you are not sure.
2.Click the “Upgrade firmware” button, then you will see below message
3.Press the reset button of interfacewithin a very short period, then click above OK button
4.If you did all well, firmware upgrade is starts and proceed like below.
The upgrade takes about4minutes, so be patient and don’t disconnect andpower off the interface or don’t close the software, just wait until progress bar reach the end.Basically, uncompleted firmware upgrade also can repeat, so in case of serious event or freeze of system, you can retry from the beginning again.
5.By end of the upgrade the below message is appear, and interface reconnect automatically
6.System is upgraded and ready to use
7.Troubleshootingof firmware upgrade
In case of error, don’t be panic. You are not able to destroy the UltraProg hardware by firmware upgrade. UltraProg has protected memory area, which is not changed by any firmware upgrade. Even the Power LED is not lightning, the hardware is not dead, justupgraded unwell. Please repeat the steps above, until you get successful upgrade.
This post is from China OBD2, Chinaobd2 is a leading supplier of all kinds of Car Diagnostic Tool, Truck Diagnostic Tool, OBD2 Code Reader, Car Key Programmer,ECU Chip Tunning,etc. The main popular diagnostic tools for workshop are:Vag COM, VAS5054A, GM Tech2, iProg+ Programmer, Orange 5 programmer, Scania VCI3, etc.
How useful was this post?
Click on a star to rate it!
Average rating / 5. Vote count:
Please keep this link if you copy the post!
Tags: Car Key Programmer Code Reader ECU Chip Tunning gm iprog key Key Pro OBD2 original program Scania VCI vci wholesale
Related Posts
Jaguar XF 2016 93C86 Mileage Adjustment by Iprog
2023.06.1
How to Use Cummins Insite Perform A ECM Calibration Download
2020.06.20
How to Disable BMW E92 “ Seatbelt Assist ” arm
2019.02.24
V2018.12 Best Quality WIFI BMW ICOM NEXT A + B + C NEW GENERATION Of ICOM A2 Ins...
2018.12.26
Mercedes-Benz Xentry.OpenShell.XDOS 2019.03 Free Download
2019.02.26
The Benefits Of A Truck ECM Diagnosis
2024.01.24
How to read keys of Nissan Altima 2019-2022 Smart Remote 5 Buttons 433MHz with S...
2024.02.4
Keydiy Mini KD Mobile Key Remote Maker Generator for Android & IOS System
2018.12.17
VCP System Program BCM PQx5 for VW Golf,Polo,Ibiza
2019.07.22
SDconnect c4 DAS not work after network cable is connected (fixed)
2019.12.12