For Jeep Renegade or Fiat 500X vehicle owner,you may be experience on or more of the following,this article will show you how to solve this problem.
- Poor quality of German translations.
- Acoustic warning missing when approaching a speed camera. (EMEA market only)
- 3D view malfunctions.
- Road signs not correctly viewed during navigation.
- After ignition has been turned on the language switches automatically to Italian frompreviously selected language.
- Forward Collision Warning with mitigation (FCW+) turns off spontaneously after theignition has been turned on and FCW+ warning light is on.
2015 – 2016 (BU) Jeep Renegade
2016 (FB) Fiat 500X
THE wiTECH SOFTWARE IS REQUIRED TO BE AT THE LATEST RELEASE BEFORE PERFORMING THIS PROCEDURE.
This instruction applies to vehicles within the following markets/countries: NAFTA and EMEA.
This instruction applies to vehicles built on or before February 22, 2016 (MDH 0222XX) equipped with one of the following radios:
- Uconnect 6.5NAV Radio (Sales Code RA4).
- Uconnect 6.5NAV Radio (Sales Code RG4).
Using a Scan Tool (wiTECH) with the appropriate Diagnostic Procedures available in TechCONNECT, verify is any Diagnostic Trouble Codes (DTCs) are set. If DTCs or symptom conditions, other than the ones listed above are present, record the issues on the repair order and repair as necessary before proceeding further with this instruction.
If the customer describes the symptom/condition listed, perform the Repair Procedure.
1.Has the USB flash drive been created?
a.YES >>> Proceed to Step #5.
b.NO >>> Proceed to Step #2.
2.Go to DealerCONNECT> Service> UCONNECT Information & Utilities> Uconnect Dealer software downloads to download the files.
3.If a security message appears “Do you want to view only the web page content that was delivered securely?” press ”NO” to continue.
NOTE: If you cannot download the software, make sure you have proper security access. If not, have the Service Manager or Shop Foreman download the software update.
4.To download the software files to a USB flash drive, follow the on screen instructions and perform the following:
a.Acquire a blank USB flash drive with at least 4 gb of space.
b.Download the software update file to your local pc’s desktop.
c.Be sure to extract the file before copying it to the blank USB flash drive.
d.A blank USB flash drive will be needed one for each radio update, additional updates can not be on the same USB flash drive.
e.Once the file is saved to the USB flash drive, it is recommended you label the USB flash drive with the instruction number and proper radio sales codes.
5.With the engine running and radio on, insert the correct USB flash drive with the new software into USB port.
6.The next screen display will have the old and new software levels. The radio will be updated to the latest release level.
7.Is the radio at software level at the latest release level?
a.YES >>> The radio software is already up to date. The instruction is now complete.
b.NO >>> The radio software needs to be updated. Proceed to Step #8.
8.Press the “Yes” button to start the update.
NOTE: If the software update process is interrupted, aborted or failed, the process should be restarted.
NOTE: Do not cycle the ignition or touch the radio during the update process.
9.The update may take up to 20 minutes to load. No other actions will be needed to initiate the update.
10.After the update is done, the screen will display the software levels again.
11.Press “No” and turn the vehicle off. Open and close the driver’s door and let the Bus go to sleep.
NOTE: Make sure to leave the ignition off, do not press the brake pedal, and do not open any doors, so the modules will go to sleep.
12.Cycle the ignition on, then back off one more time. Open and close the driver’s door and let the Bus go to sleep. This will complete the radio update.
13.Remove the USB flash drive, the instruction is now complete.
This post is from China OBD2, Chinaobd2 is a leading supplier of all kinds of Car Diagnostic Tool, Truck Diagnostic Tool, OBD2 Code Reader, Car Key Programmer,ECU Chip Tunning,etc. The main popular diagnostic tools for workshop are:Vag COM, VAS5054A, GM Tech2, iProg+ Programmer, Orange 5 programmer, Scania VCI3, etc.
How useful was this post?
Click on a star to rate it!
Average rating / 5. Vote count:
Please keep this link if you copy the post!
BMW 3 E46 Service Light Reset by Launch X431
JDiag JD101 Code Readers Engine Scan Tool Check Engine Light Car Diagnostic Tool...
How to do an Oil Change for Toyota Camry 2005-2010 by Yourself
BMW Electrochromatic Interior Mirror with Compass /Garage Door Opener Retrofit
JMD Super Remote Frequently Answer Questions
How to use Mini ACDP to read MEV1722 DME ISN?
LISHI BW9MH 2 in1 Auto Pick and Decoder for BMW Motorcycle Tool
Toyota TIS Techstream 14.30.023 V14.20.019 V14.10.028 Free Download & Win7 ...
Scania SOPS File Encryptor/Decryptor +XML Editor Download
Suzuki Worldwide Automotive EPC Free Download