Before using Xhorse Dolphin key cutting machine, you need to do these 4 steps of calibration.
-> Height level adjustment
-> Cutting calibration
->Clamp calibration M1
->Clamp calibration M2
Need:
One mobile phone (Android or IOS) and turn on Bluetooth
Complete download Xhorse Dolphin APP on your phone.
Click on “Select” to connect Bluetooth, and you can see the Bluetooth Icon on the Condor Dolphin machine display.
Guide:
Part 1: Height level adjustment
Select “Machine Parameter”.
Select “Height level adjustment”.
Tighten the probe and clamp using the screwdriver by following the on-screen tip.
After that, select “Start” to adjust the height level until you can see it completed.
After height level adjustment. Please setting cutter diameter again!
Part 2: Cutting calibration.
Back to select ” Cutting calibration”.
Please read the tip and follow it to do, then click on “Start”,
Select “Start” to calibrate.
Part 3: Clamp calibration.
Back to select ” Clamp calibration”.
Select M1 clamp to calibrate.
Read tip :
- Before use this function, please make sure already done “Height level adjustmen”.
- Please insert new HON66 key blank and tighten the clamp.
Select “Start”.
M1 clamp calibration ok.
Change M2 clamp to calibrate.
Read the tip whether you did as it says.
Continue for the M2-B, M2-C, M2-D calibration.
www.chinaobd2.com
How useful was this post?
Click on a star to rate it!
Average rating / 5. Vote count:
Please keep this link if you copy the post!
Tags: key key cutting machine xhorse Xhorse Dolphin key cutting machine
Related Posts
WiTech MicroPod 2 Customer Questions & Answers
2024.01.28
Xhorse Remote Tester for Radio Frequency Infrared
2018.12.17
How to Remove and Install ECM for Hitachi ZX890-7 Excavator
2023.04.8
Xhorse Condor XC-009 Key Cutting Machine for Single-Sided keys and Double-Sided ...
2018.12.17
What kinds of key cutting machine do you use?
2019.12.19
1.5mm Milling Cutter for IKEYCUTTER CONDOR XC-007 Master Series Key Cutting Mach...
2018.12.17
OBDSTAR X300DP Plus / X300 Pro4 Key Master IMMO Update in March.2023
2023.04.12
How to Install FCOM Diagnostic Software on Window/Linux
2019.05.14
Promotion V2019.3 MB SD C4 Connect Compact 4 Star Diagnosis with WIFI for Cars a...
2019.02.17
How to Open the Corresponding Disk When Running Mitchell Ondemand5 Software
2019.07.24