What is Caterpillar ET?
Caterpillar Electronic Technician (Cat ET) is diagnostic software required to communicate, diagnose and service electronically controlled Caterpillar engines and machines. When connected to an Electronic Control Module (ECM), a technician has the ability to diagnose existing and potential problems, configure the product, and obtain data for analysis.
Caterpillar ET Functions List:
1.View active and logged diagnostics.
2.View events where irregularities occurred and were logged by the ECM.
3.View the status of a group of parameters (temperatures, pressures, etc.) simultaneously.
4.Record and log performance data.
5.Graph a group of status parameters.
6.View the current configuration of an ECM.
7.Change ECM configurations.
8.Perform diagnostic tests.
9.Perform calibrations.
10.Print reports and diagnostic results.
11.Please keep in mind that some ecm settings for example, speed limit requires factory password. The factory password generator is not included in this application
Caterpillar ET Support Languages:
English,Chinese,Danish,French,German,Italian,Portuguese,Spanish
Caterpillar ET Support OS:
Window 7,Window 8,8.1,Window 10 32 bit and 64 bit
PC Requirements
Recommended Configurations
PC containing a 2.0 GHz dual-core processor·
3GB RAM·
3GB of available hard disk drive·
DVD-ROM drive·
15.4 inch XGA Screen (1280×1024 compatible)·
MicrosoftÒWindows™ 7 Professionalor Windows 8 Professional
(Note: Windows 8 RT is not supported)·
RS232 port with 16550AF UART or compatible (for use with Comm Adapter II)·
USB 1.1 or 2.0 port (for use with Comm Adapter 3)·
Ethernet RJ45 connector·
Built in pointing device or mouse·
For security purposes, MicrosoftÒInternet Explorerversion 9 or newer is recommended.
Note: The most recent version of MicrosoftÒInternet Explorer may not be validated to work with the service tool.
Minimum Configurations
PC containing a Pentium 2 GHz processor or greater·
1GB RAM·
500MB of available hard disk drive·
CD-ROM drive·
Super VGA monitor or display (1024×768)·
MicrosoftÒWindows™ 7 Professional or Windows 8 Professional
(Note: Windows 8 RT is not supported)·
RS232 port with 16550AF UART or compatible (for use with Comm Adapter II)·
USB 1.1 or 2.0 port (for use with Comm Adapter 3)·
Ethernet RJ45 connector·
Built in pointing device or mouse·
For security purposes, MicrosoftÒInternet Explorer version 9 or newer is recommended.
Note: The most recent version of MicrosoftÒInternet Explorer may not be validated to work with the service tool.
Caterpillar ET Free Download
Caterpillar ET 2018 A
This post is from China OBD2, Chinaobd2 is a leading supplier of all kinds of Car Diagnostic Tool, Truck Diagnostic Tool, OBD2 Code Reader, Car Key Programmer,ECU Chip Tunning,etc. The main popular diagnostic tools for workshop are:Vag COM, VAS5054A, GM Tech2, iProg+ Programmer, Orange 5 programmer, Scania VCI3, etc.
How useful was this post?
Click on a star to rate it!
Average rating / 5. Vote count:
Please keep this link if you copy the post!
Tags: Car Key Programmer cat Code Reader diagnostic software ECU Chip Tunning gm iprog key Key Pro lish OBD2 original program Scania VCI vci wholesale
Related Posts
Still RX20 Forklift Truck Traction Controller MCU3 Removing & Installing Gui...
2023.04.4
How to Renew Rear Oil Seals for Perkins 1000 Series Engine
2023.04.3
Only US$155.00 NEXIQ USB Link Truck Scanner tool for Vietnam Valid untill 2019/2...
2019.02.18
How to Solve SVDI 2019 License Missing
2019.12.26
Detroit DDEC6 Engine Password Protection Removal by Backdoor Calculator
2023.04.3
How to Solve CNH DPA5 Incompatible with EST Software
2023.06.8
How to Disable BMW X5 2013 N55 Oxygen Sensor Trouble Codes 2D22 2D13
2023.04.4
Best Quality Wifi BMW ICOM Next A + B + C New Generation of ICOM A2
2018.12.17
Bosch ADS625 Wiring Diagram Function Test on Nissan Titan 2015
2019.06.10
How to Restore ECU Dead/Killed After Flashing with UNKN 0000 Error
2023.04.4