DVD in motion coding has been a big secret among vendors. It has remained a commercial item for a while. Some people ask for few thousand to give out the procedure, while others won’t even do it for money. Here i share the guide on how to use Expert and NCSdumy software to active BMW E60 CIC video in motion.And if you want to check more VIM coding projects,please check here:Video in Motion Coding Projects
Preparations:
BMW Coding/Flashing/Progrmming PDF+Video Guide
NCS Dummy 0.6.0.7 Free Download And Installation
NCS Expert BMW Coding Software Download
Summary (Technical)
By inspecting the before & after FSW & NETTODAT files shared by karlheinz, here’s what we found:
FSW (before):
o SPEEDLOCK_X_KMH_MAX_C0E = 3_kmh
o SPEEDLOCK_X_KMH_MIN_C0E = 3_kmh
FSW (after):
o SPEEDLOCK_X_KMH_MAX_C0E = disappeared
o SPEEDLOCK_X_KMH_MIN_C0E = disappeared
NETTODAT (before and after, the diff between the two files):
o B 00300010,0010,50,81,1D,46,00,00,C0,03,03,03,03,11,11,01,01,FF
o B 00300010,0010,50,81,1D,46,00,00,C0,FF,FF,03,03,11,11,01,01,FF
This was a breakthrough discovery. The original 03,03 correspond to 3_kmh and 3_kmh. Most of us probably have 00,00, which means speedlock min/max are set to “nicht_aktiv”. We want to set them as FF,FF so the two speedlock items become disabled and disappeared from the FSW, and this is when VIM is activated.
Disclaimer
The following tutorial to activate DVD in Motion is for testing purposes only. It is intended for OFFROAD and Experimental use ONLY. You assume full responsibility to watch video while in motion. We are not liable for any damages to your vehicles or any bodily injuries caused from this tutorial.
The Tutorial
This tutorial assumes you have basic background and some experience on NCSexpert and coding procedure.
Using NCSexpert, read your CIC module as usual. And note down the daten file used for your CIC
Open NCSdummy V5.0+ ( can be downloaded from NSCDummy thread ) and follow the steps in the below screenshot to disassemble the Ediabas daten file which is used by your CIC module ( CIC.C09 in our example )
Open the disassembled file which is saved on your desktop ( CIC.C09.txt in our example ) with any TXT editor and looks for the following codes and make the necessary changes as per the screenshot below .( Remember to save the changes before closing the TXT file )
Now we need to reassemble the edited TXT file (CIC.C09.txt in our example ) and replace the original one with the modified file , we can do that by following the steps in the below screen .
Edit your CIC trc file suing NCSDummy Editor and look for the following codes and make the changes as per the screenshots
SPEEDLOCK_X_KMH_MAX_C0E = 3_kmh
SPEEDLOCK_X_KMH_MIN_C0E = 3_kmh
VIDEO_NUR_MIT_HANDBREMSE = nicht_aktiv
Code your CIC with the new changes , and Congratulation , your VIM is done
1.The subsequent codings on the CIC will not affect VIM as long as you are still using the Modified CIC.CXX file.
2.If you attempt to read the CIC module with an original CIC.CXX file, you will not see the speedlock functions. However, if you attempt to recode with the original CIC.CXX file, the VIM coding will be lost!
FINAL WARNING: VIM is for testing purposes only and should not be used in normal driving. It is intended for OFF‐ROAD and Experimental use ONLY.
How useful was this post?
Click on a star to rate it!
Average rating / 5. Vote count:
Please keep this link if you copy the post!
Tags: original
Related Posts
What is Vapon VP996 Auto Key Programmer
2023.04.2
How to use PCF79xx Unlocker for Renewing Used Keys?
2019.03.1
How To Do GM Control Module Programming With Multiple Diagnostic Interface (MDI/...
2019.12.16
Microcat Ford Parts Catalog Free Download
2019.05.14
BMW X5 X6 N55 Valvetronic Transmission Malfunction Trouble Repair
2020.10.11
WinOLS Disable/Close FAP and DPF for EDC16C34
2019.07.22
BT TruckCom TE v2.8 Multilanguage Download
2019.07.19
Toyota Lexus ES250 Tire Pressure Sensor Program by Launch X431
2020.07.18
ODIS enables/disables VW/Audi component protection
2024.01.28
VCDS v15.7 German Version Free Download
2020.05.8