This mini post show the operation of how to use Launch X431 to reset service lamp and service interval set for Audi A6L.
And here is a collection of Audi A6 Trouble Repair.
Service Lamp Reset procedure:
1.Connect X-431, select [CAN BUS II DIAGNOSTIC CONNECTOR] connector;
2.Ignition ON;
3.Select Audi maker;
4.Select CAN bus system;
5.Access 17 Instrument cluster;;
6.Select 10 Adaptation,enter 02 channel, click OK;
7.Click “-”button to change the adaptation value into “0”, click OK;
8.Exit to end the reset.
Set Interval procedure:
1.Connect X-431, select [CAN BUS II DIAGNOSTIC CONNECTOR] connector;
2.Ignition ON;
3.Select Audi maker;
4.Select CAN bus system;
5.Access 17 Instrument cluster;
6.Select 10 Adaptation,enter 40 channel, click OK;
7.Select “->” to enter the mileage interval for next service(e.g.: input 100 for 5000km,
100=(15000-5000)/100),click OK;
8.Exit to end the set.
Note: Before change the interval mileage, please verify that the adaptation value in each channel Number: Channel “41” is “0”,channel “42” is “150”, channel “43” is “150” and channel “44” is“365”, otherwise, please modify it as above procedure.
How useful was this post?
Click on a star to rate it!
Average rating / 5. Vote count:
Please keep this link if you copy the post!
Tags: Launch Launch X431 X431
Related Posts
Jeep Cherokee RKE Remote Keyless Entry Programming by Launch X431
2019.03.27
VCDS Perform Audi A4 ABS Coding Guide
2019.02.24
2014 Volkswagen Polo P106900 Trouble Repair by Launch X431
2023.04.4
How to Program 2018 BMW 530LI xDrive G38 EPS by Launch X-431 Pad 7
2024.01.28
Launch X431 Perform ECU Coding for VW Models
2019.03.8
How to use Launch X431 IMMO to add a new key for Porsche Cayenne 2011-2017
2024.01.28
Launch X431 “SMARTBOX Serial Number is Different from SMARTBOX” Error Solution...
2023.04.3
Launch X431 Configure & Initialize Ford PATS Passive Anti Theft System
2019.05.14
Launch X431 V 8inch Tablet Wifi/Bluetooth Full System Diagnostic Tool Two Years ...
2018.12.17
How to Restore ECU Dead/Killed After Flashing with UNKN 0000 Error
2023.04.4